Home » Products » Flow Measurement » Coriolis Mass Flowmeter

Coriolis Mass Flowmeter

HG-CMFI Coriolis mass flowmeter is a patented flow measurement solution developed by our company. It offers the most accurate measurement available for virtually any process fluid, while exhibiting exceptionally low pressure drop.

Without the need for additional equipment, manual calculations, or estimations, the Coriolis mass flowmeter supports direct measurement of mass flow, volume flow, density, and temperature for liquids and slurries. It has unsurpassed performance even under the harshest operating environments.

This line of Coriolis flow meter comes without movable parts, or any special mounting or flow conditioning requirements. To meet each of your demands, it is fabricate with stainless steel wetted parts and a wide variety of process connections.

Technical Specifications (Table 1)
Titles Technical Specifications
Mass flow accuracy ±[ 0.2% + (zero stability /flow rate×100%)]
Mass flow repeatability ±( 1/2 )×[0.2% + (zero stability /flow rate×100%)]
Density range 0.2 g /cm3 ~ 3.5g /cm3
Density accuracy ±0.002g/cm3
Temperature range -60 ℃ ~ +200 ℃
Temperature accuracy ±1 ℃
Current output 4mA ~ 20mA
Frequency/pulse output 0Hz ~ 10kHz
Contact capacity of a Batch Control relay 24V/0.1A
Contact form normally open (normally close available for special orders)
Basic Parameters
Parameters of Working Conditions (Table 2)
Titles Parameters
Temperature range of fluid -40 ℃~+200 ℃
Ambient temperature 0 ℃~+40 ℃
Environmental humidity ≤90% RH, non condensation
Atmospheric pressure 86kPa~106kPa
Power supply of transmitters Power supply Voltage: AC(220±10%)V, (50±5%)Hz Composite Voltage: DC (24±10%) V
Power < 15W
Specifications (Table 3)
Specs Line Sizes ( mm ) Flow Range ( t/h ) Calibration Range ( t/h ) Max. Working Pressure ( MPa ) Zero Stability ( t/h ) Velocity Parameter ( h m/t s )
DN1 1 0~0.04 0.004~0.04 30.0 0.000008 353.7
DN3 3 0~0.35 0.035~0.35 30.0 0.000067 39.3
DN6 6 0~0.7 0.07~0.7 30.0 0.00016 19.65
DN10 10 0~1.2 0.12~1.2 30.0 0.0002 4.912
DN15 15 0~6.4 0.64~6.4 4.0 0.0011 2.183
DN25 25 0~16 1.6~16 4.0 0.002 0.902
DN40 40 0~40 4~40 4.0 0.003 0.334
DN50 50 0~65 6.5~65 4.0 0.006 0.197
DN80 80 0~160 16~160 2.5 0.01 0.0873
DN100 100 0~250 25~250 2.5 0.015 0.0544
DN150 150 0~550 55~550 2.5 0.03 0.0239
Inquiry Form