Home » Products » Flow Measurement » Doppler Ultrasonic Flowmeter » HGDU600-W Wall-mounted Doppler Ultrasonic Flowmeter

HGDU600-W Wall-mounted Doppler Ultrasonic Flowmeter

HGDU600-W Wall-mounted Doppler Ultrasonic Flow Meter is designed to measure volumetric flow of liquid within closed conduit, the pipe line must be full of liquids, and there must be a certain amount of air bubbles or suspended solids in liquid.

The Doppler ultrasonic flow meter can display flow rate and flow totalizer, etc., and is configured with 4-20mA, Relays, OCT outputs.

Features:
It is suitable for pipe sizes ranging from 40 to 4000mm
For dirty liquids, a certain amount of air bubbles or suspended solids shall be contained
Excellent low flow rate measurement ability, low to 0.05m/s
A wide range of flow measurement, high flow rate can reach 12m/s
High-temperature transducer is suitable to liquids of -35℃ ~ 200℃
Do not need to shut down the pipe flow when installing the transducers
User-friendly configuration
4-20mA, Relay and OCT outputs
Accuracy: 2.0% Calibrated span

Applications:
Raw sewage
Activated sludge
Ground water
Pulp and paper slurries
Chemical slurries
Drainage
Mining recirculation

Specifications: Transmitter

Measurement principle Doppler ultrasonic
Resolution 0.25mm/s
Repeatability 0.2% of reading
Accuracy 0.5% -- 2.0% F.S.
Response time 2-60s for optional
Flow Velocity Range 0.05- 12 m/s
Liquid Types Supported Liquids containing 100ppm of reflectors and at least 20% of the reflectors are larger than 100 micron.
Power Supply AC: 85-265V DC: 24V/500mA
Enclosure type Wall-mounted
Degree of protection IP66 according to EN60529
Operating temperature -20℃ to +60℃
Housing material Fiberglass
Measurement Channels 1
Display 2 line × 8 characters LCD, 8-digit rate or 8-digit total (resettable)
Units User Configured (English and Metric)
Rate Rate and Velocity Display
Totalized gallons, ft³, barrels, lbs, liters, m³,kg
Communication 4-20mA,Relay and OCT output
keypad 4pcs buttons
Size 244(h)*196(w)*114(d)mm
Weight 2.4kg

Specifications: Transmitter

Transducers Type Clamp-on
Degree of protection IP65. IP67 or IP68 according to EN60529
Suited Liquid Temperature Std. Temp.: -35℃~85℃ for short periods up to 120℃
High Temp.: -35℃~200℃ for short periods up to 250℃
Pipe diameter range 40-4000 mm
Transducer Size 60(h)*34(w)*32(d)mm
Material of transducer Aluminum for standard temp.sensor and peek for high temp.sensor
Cable Length Std: 10m
Related products
Inquiry Form